Scangauge Ii Scanguage 2 Obd2 Auto Computer Code Reader on 2040-parts.com
Peoria, Illinois, US
Connects In Seconds
The cable is detachable at the ScanGauge II and can be connected on the back or side of the unit. Once connected to your vehicles OBDII port, the ScanGaugeII automatically negotiates communications with your cars computer - It's that easy!
Fits Almost Anywhere
The compact size of the ScanGaugeII allows you to mount just about anywhere. It's so small, you can even slip it into your pocket and take it with you.
The dimensions of the ScanGaugeII are 4.8" wide by 1.5" high by 1.0" deep. The cord from the diagnostic connector to the control/display is 6' long and about 0.2" in diameter.
Built-In Scan Tool
The ScanGauge II can check for Diagnostic Trouble Codes (DTCs) and if found, can display how many there are and the Trouble Codes themselves. Using the internet or repair manuals, these can be translated to the failed component and repairs can be made.
Data captured when the Trouble Code was set can be recalled to help troubleshoot the problems (was the temperature hot or cold, speed high or low, etc). The ScanGauge II can be used to clear the trouble codes and data which will turn off the warning (Check Engine, Service Engine soon, etc) lamp.
Some states now require that vehicle self tests have been completed since the codes were last cleared, before running emissions checks. The ScanGauge reports this "Readiness".
- Reads Trouble Codes
- Reads Conditions that set the Trouble Code
- Clears Trouble Codes
- Turns off "Check Engine" light
- Tells you when vehicle is "Ready" to pass OBDII testing
- Make and store up to 10 rewritable special codes to send to the vehicle computer
- Ships with the latest version of X-Gauge
Digital Gauges
The ScanGauge II can display up to 4 of 12 possible gauges at one time. The units of measure can be changed and the rate of update can be increased or decreased.
- Fuel Economy
- Fuel Rate
- Battery Voltage
- Coolant Temperature
- Intake Air Temperature
- Engine Speed (RPM)
- Vehicle speed (MPH and KM/H)
- Manifold Pressure (not available on some vehicles)
- Engine Load
- Throttle Position
- Ignition Timing
- Open/Closed Loop
Trip Computers
The CURRENT trip is restarted after the engine has been off for more than 3 minutes. The TODAY trip is restarted after the vehicle has not moved for 9 hours. The data from TODAY is moved to PREVIOUS DAY when it is restarted. This way, you don't have to reset the trip computers when you start a trip. There is also a TANK Trip which you reset when you fill up the tank. It can provide you with "to empty" data as well as other useful information. The information is available anytime during the trip. The CURRENT trip can be reset. This is useful for making fuel economy measurements at a steady speed.
The GAUGE mode can display instantaneous fuel economy, but small variations in throttle, terrain or even wind will cause this to wander around some. The CURRENT trip computer and its RESET capability can smooth this out over a longer distance. A demonstration of how to do this can be chosen below.
The TRIP modes in the ScanGauge II can be used to save gas. Improved driving habits can improve fuel economy by up to 30% according to a US Government source. The ScanGauge II lets you try different driving techniques and routes and gives quick feedback on how they affect fuel use.
- Maximum Speed
- Average Speed
- Maximum Coolant Temperature
- Maximum RPM
- Driving Time
- Driving Distance
- Fuel Used
- Trip Fuel Economy
- Distance to Empty
- Time to Empty
- Fuel to Empty
Contents
- ScanGaugeII unit
- 1 ScanGaugeII cable, (6 ft)
- ScanGaugeII manual
- 2 velcro strips
Posted with eBay Mobile
Diagnostic Tools / Equipment for Sale
- Snapon snap on - mt2261l- timing light digital tach / advance mustang chevrolet (US $199.99)
- Autotap automobile car diagnostic scanner obd2 obd ii scan tool(US $95.00)
- Caterpillar electronic technician adaptor for gas engines.(US $29.95)
- Atd ad 3692 a/c r134a aluminum manifold gauge set with hoses(US $65.50)
- Otc nemisys matco pro scan toyota / lexus asian cable adapter kit obd1 to obd2(US $49.99)
- Slime digital tire gauge **save gas mileage with this wonderful item**(US $14.50)
Toyota adds i-Road to urban mobility trials
Tue, 01 Oct 2013TOYOTA has added its futuristic i-Road concept to its “Ha:mo” urban transport trials. It is the latest vehicle to be added to the rapidly expanding scheme, which is being held at the so-called Toyota City; Toyota’s huge presence in Japan’s Aichi Prefecture. The Ha:mo (Harmonious Mobility network) trials are an attempt to develop a sophisticated, integrated transport system for cities, making use of electric vehicles wherever possible but with the key emphasis on encouraging travellers to use the ‘most appropriate’ means of transport at all times.
Electric Ford Focus to guest on Leno show
Wed, 09 Sep 2009Jay Leno's new show goes live Monday on NBC, and a guest star from Dearborn, Mich., will have a recurring role. The battery-electric Ford Focus will be the centerpiece of a bit dubbed the “Green Car Challenge” on the show. Leno, a noted car guy, will have celebrity guests compete for the best track times in the Focus.
Aston Martin signs Christian Klien as final factory driver
Wed, 23 Mar 2011Ex-Formula One driver Christian Klien has completed Aston Martin Racing's factory driver lineup, the team said on Wednesday. He will join his new teammates in the all-new LMP1-class 007 AMR-One in the 24 Hours of Le Mans. Klien competed in 49 F1 races since 2004 and drove for Peugeot in Europe's Le Mans Series, and in 2008, he had both the fastest lap and finished third in the 24 Hours of Le Mans.