New Grc- 50" Sprint Car Front Axle Pro Series 2 1/2" Chromoly on 2040-parts.com

NEW  GRC "PRO SERIES" CHROMOLY SPRINT CAR FRONT AXLE

This is the Specs of our Standard 50" Pro Series Front Axle

Our Pro Series front axles are designed to get you to the front and keep you there.  We at Greber Racing Components know are axles are not the cheapest on the market and we're cool with that.  If you are looking for cheap then go buy it elsewhere.  If you are looking for a Non Mass Produced, Handcrafted, American Made, Accurate and Quality Built, Quality Inspected Piece then you found the right spot. 

All of our axles built at Greber Racing Components are:

• Made from American Made 4130 Chromoly Tubing- No Chinese material here
• All Handcrafted and Tig Welded by AWS Certified and Skilled American Workers- No Robots
• All components are 100% Jig built and CNC Machined
• True 2- 1/2" O.D. x 095 wall Tube- Polished and checked for straightness before and after welding
• 8 and 12 Degrees of Kingpin Inclination
• 10 Degrees of Caster
• 50" Kingpin Center to Kingpin Center
• Our Axles are all Flagged at the King Pin with plates:
• This increases the amount of weld around the end of the axles and king pin bosses.
• Our axles are slotted and machined at the end to receive the king pin flags to ensure a true 8 and 12 degree kingpin inclination.
• Increased weld around the king pin also ensures the bosses will not break out of the axle-
• Precision CNC Machined King Pin Bosses- Honed After axles are welded to ensure accuracy.
• Precision CNC Machined Mounts- Machined accurate and true
• Mount Locations Jig Placed- Designed to fit most Sprint Car Chassis, however we can build any offset or move locations to anything you specify
• Precision CNC Machined 1/2" Diameter Radius Rod Spuds
• 1/2"-20 Fine Threaded Shock Mounts- Our Standard Pro Series Axle comes with two mounting locations for shocks designed to fit any gas charged shock
• 1/2"-20 Threaded Panhard Bar Stud- Lock nut also supplied
• Lightweight Design- Approximate weight of 13.5 pounds
• Choice of Finish- Available in Black Powdercoat, Clear Powdercoat, Silver Powdercoat, or uncoated
• 100% Inspected- All of our axles to thru a 100% total quality inspection test post building.  Each Pro Series Axle is checked for accuracy to build our specifications and to any custom measurements requested.
• Serial Numbered and Measured- Each Pro Series Axle built by Greber Racing Components is:
• Each Axle is given a unique serial number
• Measured and checked for accuracy on our in-house Coordinate Measuring Machine (CMM)
• A copy of the results will be shipped with the axle and also retained on file in our office
• If you suspect the axle is bent at any point in its life, send it back to us and we will check it for Free!!
• Customizable- Each and every point on a GRC Pro Series axle is available to be customized
• Want to change Caster, Camber or Offset- No Problem send a message or call us....Thats something chinese competors can't offer.
• Changes and axle build will remain strictly confidential from your competitors