Icon 2011+ 2500hd / 3500 5-8" Lift - Stage 2 # 78201 on 2040-parts.com

Included in this lift kit are components and features such as a heavy duty boxed sub-frame with integrated differential and transmission skid plates, precision CNC machined cast iron steering knuckles, rear lift blocks with built in bump stops, and the best part is all of this is 100% Made in the USA! The Icon 78201 Stage 2 GM 2500HD / 3500 suspension lift is Icon's best performing 2.0" shock equipped suspension system. This lift comes complete with V.S. Series 2.0 Front Shock Absorbers, which is an upgrade to the front shock extensions included with the Stage 1 systems. The Icon V.S. front and rear shocks are designed and built specifically for this application. While some lift manufacturers include "generic shocks for use with their kits, Icon builds their shocks in-house and makes sure they provide the best ride possible from a 2.0" diameter shock absorber. For high performance oriented customers Icon also offers upgraded Kit Stages that include the Stage 3 system that features 2.50" diameter body Icon Piggy Back Reservoir equipped shocks, and the ultimate Stage 4 system that includes Icon's best shock options available for this truck!

Key Features:
Heavy Duty Boxed Sub-Frame with integrated Diff and Transmission Skid Plates
Precision CNC Machined Cast Iron Steering Knuckles
Fits 2wd & 4wd models
5-8" Adjustable Lift Height
Improved driveability and handling over stock
Complies with GM Stabilitrak System
ICON high quality fit, appearance and improved suspension function
Retains Factory track width when high offset wheels are used
100% made in the USA!
Lifetime warranty on ICON Fabricated non serviceable components

Tech Info:
A replacement front drive shaft & shift linkage brackets are recommended for 4x4 models that will be operated at highway speeds of 15 mph or more. The factory front drive shaft joints can bind at the increased operating angle created when the lift is installed. This can lead to a front drive shaft vibration. The OEM factory wheels and tires can be used with this lift. If running a larger than factory size tire the wheel back space should not exceed 5.5" inches. This means aftermarket wheels will in most cases be required. This is to ensure that sufficient clearance is available between the tire, wheel, and suspension components. When running 17" or 18" wheels you can have up to 5.50" inches of back space. When running a 20" or larger wheel up to 5.75" inches of back space can be used. This lift is adjustable between 5" and 8" inches of lift. Because the lift can be adjusted this system can be used with a wide range of tire sizes. The most common tire size customers want to run is a 35" x 12.50" or similar. When running a 35" tire the lift should be set to approximately 6" inches. This lift has the ability to clear up to a 37" tire when adjusted to the full 8" inches. Please note, when running 37" tires some trimming will be required.

System Components:
78700 (QTY - 1) 2011+ Chevrolet 2500HD - Subframe Box Kit - Front/Rear Subframes, Transmission and Diff Skids Diff Drops & Hardware / Blocks and Ubolts

78702 (QTY - 1) 2011+ Chevrolet 2500HD - Torsion Drop / Bump Stop Kit

76532 (QTY - 2) 2011+ Chevy 2500HD 2wd & 4wd 5" - 8" Lift Front Shock - 2.0 Aluminum Series

76535 (QTY - 2) 2011+ Chevy 2500HD 2WD & 4WD 5" - 8" Lift Rear Shock - 2.0 Aluminum Series

For more information on this or any other Icon Vehicle Dynamics product please click on the "ask a question" link located at the very top of this page.

This item ships for FREE via standard ground service to any address located in the 48 United States of America and Hawaii!